Show simple item record

dc.contributor.authorRodrigo Cruz, Pedro Manuel
dc.contributor.authorVelázquez, Ramiro
dc.date.accessioned2018-06-10T21:37:33Z
dc.date.available2018-06-10T21:37:33Z
dc.date.issued2018-02
dc.identifier.citationRodrigo, P. M.; Velázquez,R.; Fernández,E. F.; Almonacid,F. M. y Lay-Ekuakille, A. (2018) A method for the outdoor thermal characterisation of high-concentrator photovoltaic modules alternative to the IEC 62670-3 standard. Energy 148, : 159-168, doi:10.1016/j.energy.2017.12.064es_ES, en_US
dc.identifier.otherCampus Aguascalienteses_ES, en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12552/4618
dc.identifier.urihttp://dx.doi.org/10.1016/j.energy.2017.12.064
dc.description.abstractThe IEC 62670-3 standard recommends the open-circuit voltage method to calculate the cell temperature inside high-concentrator photovoltaic (HCPV) modules. This method requires knowledge of the temperature coefficient of open-circuit voltage (β), and the same standard provides a procedure to get this parameter. In this paper, an alternative method for the thermal characterisation of HCPV modules is proposed. As an advantage, it allows obtaining both the β parameter and the internal thermal resistance (ρ) of the device from outdoor measurements. No internal sensor for measuring the cell temperature is required as in the case of the IEC 62670-3 standard. Knowing the ρ parameter allows a more accurate characterisation of the cell temperature. The proposed procedure is applied to a real HCPV module. An outdoor experimental campaign of two months in Jaén (Southern Spain) was carried out. The β value was underestimated in a 0.50% and the ρ value was overestimated in a 4.18%. When applying the estimated parameters for the prediction of the cell temperature, the open-circuit voltage method gave a root mean square error (RMSE) of 1.41 °C, while the internal thermal resistance method gave a RMSE of 0.62 °C. © 2017
dc.description.statementofresponsibilityInvestigadoreses_ES, en_US
dc.description.tableofcontentsIngenieríaes_ES, en_US
dc.languageenges_ES, en_US
dc.publisherElsevier Ltdes_ES, en_US
dc.relationVersión del autores_ES, en_US
dc.relation.ispartofREPOSITORIO SCRIPTAes_ES, en_US
dc.relation.ispartofOPENAIREes_ES, en_US
dc.rightsAcceso Embargadoes_ES, en_US
dc.rights.urihttp://creativecommons.org/licenses/by-nc/4.0es_ES, en_US
dc.sourceEnergy
dc.subjectCell temperaturees_ES, en_US
dc.subjectConcentrator photovoltaicses_ES, en_US
dc.subjectElectrical characterisationes_ES, en_US
dc.subjectThermal characterisationes_ES, en_US
dc.subject.classificationINGENIERÍA Y TECNOLOGÍAes_ES, en_US
dc.titleA method for the outdoor thermal characterisation of high-concentrator photovoltaic modules alternative to the IEC 62670-3 standardes_ES, en_US
dc.typeArtículoes_ES, en_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record

Acceso Embargado
Except where otherwise noted, this item's license is described as Acceso Embargado