Effect of pressure in the microstructure of die cast Al-8.5Si-3.5cu alloys
Journal
Materials Science & Technology Conference and Exhibition 2014 (MS&T'14)
Date Issued
2014
Author(s)
Barbés Fernández, Miguel Ángel
Verdeja González, José Ignacio
Quintana, María José
Verdeja González, Luis Felipe
Type
Resource Types::text::conference output::conference proceedings::conference paper
Abstract
The microstructure of Pressure Die Casting of an Al-8.5 Si-3.5 Cu alloy used for clean room tiles shows amount of constituents (eutectic and Si phases) that do not correspond to the ones indicated by the phase diagram. Furthermore, there are differences in amount of constituents between the core and the surface zones of parts produced by this process. The work presents quantitative microstructural analysis of this type of industrially produced part, and as a possible cause for these differences, simulations of the effect of pressure on the eutectic (temperature and chemical composition) in the Al-Si system. As the production rate of these parts is very high, and solidification is very fast, microstructural heterogeneity may be related to local entrapment of gasses unable to escape during casting.
Subjects